
Safety Stickers for Factories and Warehouses in the UAE: Which Ones You Need, and Where They Go
Walk round almost any warehouse in Al Quoz or Sajja, and you'll find one. A yellow triangle by the loading bay that's gone sort of cream-coloured, half the pictogram flaked off, one corner curling up. It was put there years ago. Everybody walks past it. Nobody could tell you what it said.
That's the problem with safety stickers in UAE. Putting them up feels like the job is done, and then the sun, the dust and the forklifts quietly undo it over a couple of summers. Then an inspector or an insurer comes round, or worse, someone gets hurt, and the first thing anyone looks at is whether the hazard was marked properly.
So here's a practical run-through for factories and warehouses here. What the danger stickers, warning stickers and caution stickers actually mean (they're not interchangeable, it turns out), which ones each area of a site usually needs, where to put them so people see them, and which materials hold up in a UAE summer. We print safety and industrial labels in Umm Al Quwain for sites all over the GCC, so a fair bit of this is the stuff we end up explaining to customers anyway.
Danger, warning, caution: they're not the same thing
People use these three words like they mean the same, and on a sticker they really don't. Rough guide, the way they're normally used on labels:
Word on the sticker | What it's telling you | Typical example |
DANGER | Do this wrong and someone will very likely be killed or badly hurt | High-voltage panel, confined space, corrosive acid |
WARNING | Could kill or seriously injure, but it's less certain | Moving machinery, forklift route, flammable store |
CAUTION | Minor or moderate injury, or damage to stuff | Wet floor, low ceiling, hot surface |
The three-word system is mostly what you see on US and imported equipment. Chemical labels under GHS (the global system for hazard labels) only use two words, "Danger" for the worse hazards and "Warning" for the lesser ones. There's no "Caution" on a GHS label at all, which trips people up.
The point is, don't put DANGER on everything because it looks more serious. If every sticker on site shouts DANGER, people stop reading any of them. Save it for the stuff that can actually kill.
And a flammable sticker isn't a word thing at all, it's a symbol thing, which is the next bit.
Shapes and colours, the bit people read first
Most people don't read a safety sticker. They glance at it. So the shape and colour do most of the work before anyone gets to the words. The international standard for this is ISO 7010, and Sharjah's safety signs code uses the same shapes and colours, so these are what you'll see on most sites here.

A flammable sticker, for example, is a yellow warning triangle with a flame in it. Mix these up, say a blue circle for a hazard, and you're asking people to stop and think, which is exactly what you don't want next to a forklift route.
Read more

